• Community
  • FAQ
  • Community

    FAQ

    Total 12 posts Page 1
    • What is the maximum installation capacity?

      There is no separate limit on total installation capacity, but the capacity of each product is limited to 1,000kVA.

      This is because transformers currently used in Korea are manufactured with a capacity of 1,000kVA,
      and our products are installed by connecting to receiving and distribution switchboards, so we have set the capacity limit at 1,000kVA.

      You can be assured that our specialists will inspect your site and design the most efficient installation arrangement before installation.
    • What protection is available if the product causes a problem…

      To date, there have been no problems caused by our products.
      However, to prepare for unforeseen circumstances, we carry P/L insurance covering up to 3 billion won, enabling compensation for unexpected customer losses.
    • What are the product warranty period and service life?

      We provide a 5-year free warranty, and with appropriate maintenance the product has a long service life of 20 years or more.

      The core components of our product are guaranteed to provide semi-permanent performance. However, the wires forming the product's connections and the LCD panel are consumable components that cannot last semi-permanently.

      With maintenance of these consumable components, you can fully benefit from a service life of 20 years or more.

      Although the product lasts 20 years or more, practical considerations, including the costs of free after-sales service, mean that we must charge for service after the free service period ends.
    • Will the savings rate be the same if the incoming voltage at…

      Due to our product's power-saving principle, voltage is adjusted to a certain extent to generate feedback current.

      As the available voltage adjustment range is limited in this situation, the savings rate may be somewhat lower than usual.
    • Will reduced power consumption cause problems with load perf…

      Even when power consumption decreases by 15% or more, lighting illuminance or motor torque decreases by only around 3%.
      In our actual tests with a motor load connected, motor RPM remained unchanged even as power consumption decreased,
      showing that, depending on site conditions, there are many cases where load performance remains unchanged with no reduction at all.

      Power quality related to load performance is improved through harmonic attenuation, noise removal, power factor improvement, and three-phase balancing,
      so the actual performance reduction is very small.

      In particular, it significantly reduces instances of harmonics and inrush current placing stress on or damaging expensive chips,
      and has been shown to help reduce load maintenance costs and extend service life.
    • How much electricity does it save compared with competing pr…

      Typical competing products use simple voltage reduction or power factor improvement. Simple voltage reduction can place stress on active loads, and its savings rate is generally reported to be around 5~10%.
      Power factor improvement systems, meanwhile, are generally reported to maintain savings rates of 5% or less under today's high-power-factor electricity supply conditions.
      Our products generally achieve savings of 10~15%, with a guaranteed savings rate of 10%, offering significantly greater savings efficiency than other companies' products.
    • What does mixed load mean?

      It means a combination of loads: for example, a load that combines various types, such as motor loads and power loads.
      Our ONESAVUS power-saving device is optimized for mixed loads, enabling optimal savings efficiency even when complex loads are connected to a single distribution panel.
    • The internet and YouTube say power-saving devices do not act…

      The products currently shown on the internet and YouTube use different power-saving principles from ours.
      Other companies use parallel capacitor power factor compensation, a method that was appropriate when power factors were poor in the past.
      Products using this technology were introduced in the late '90s and attracted considerable attention in the early 2000s.
      However, power factors in Korea have now improved substantially, so parallel capacitor systems may provide only limited power savings.
      Our series Mutual Induction Reactor system directly adjusts voltage and current as well as power factor, allowing you to verify a minimum guaranteed savings rate of 10% or more.
    • What should I do if there are no power savings after install…

      Our products undergo quality inspections and various tests before shipment and final installation.
      After installation, we also take measurements using specialized equipment to show customers the savings in numerical terms.
      If there are no power savings after installation, our technical team will visit to identify the cause.
      If our product is found to be at fault, we will remove or replace it free of charge.
    • Can I use it with a drive motor?

      Our power-saving device is designed to prevent excessive current during motor startup,
      and this structural principle reduces startup current that can adversely affect service life, supplying stable current to the load equipment.
      This can also help extend the service life of load equipment.

      We also have extensive research data that enables customization for different purposes, such as residential and industrial use, allowing us to design an appropriate capacity for any application.
    • Will voltage adjustment affect the service life of the load?

      The service life of a load can decrease sharply if the supplied voltage exceeds the specified level or due to other factors such as harmonics.
      Our power-saving device adjusts voltage within the appropriate supply range specified by KEPCO and KC.
      This helps improve power quality related to load performance through harmonic attenuation, noise removal, power factor improvement, and three-phase balancing,
      thereby helping extend the service life of load equipment.
    • What is ONESAVUS's power-saving principle?

      We developed a Mutual Induction Reactor power-saving device and obtained the only patent of its kind in Korea.

      * Mutual Induction Reactor :

      A primary (1) voltage coil and a secondary (2) current coil are wound in opposite directions on a toroidal core (Toroidal Core), and their ends are connected in series so the unit functions as a series reactor.
      When voltage is applied to the reactor through the primary (1) voltage coil and current flows in the reverse direction through the secondary (2) side, mutual induction induces current in the voltage coil, supplying stable voltage and current.

    Search